Sawgrass Technologies, Inc. ChromaBlast™ Getting Started Guide for the EPSON Stylus C88 & C88 +
16
5. Once all ink bags are connected inside your Quick Connect II™ ink
box, you will need to obtain the small primer bottle to prime each line.
6. Take the cartridge in one
hand and the priming bottle
in the other. Squeeze the
priming bottle to release all
of the air and insert it into
the bottom of the cartridge
to pull ink through the line
until a small amount of it
reaches the reservoir.
7. Once ink is in the
reservoir, pinch together the
clamp that’s connected to
the tube on the outside of
the box. This will ensure
that no more ink will pull into
the reservoir until you are
ready for it.
8. Repeat Steps 6 & 7 for
each cartridge.
9. Place the lid back onto the Quick Connect II™ ink box and gently
place the cartridges on top of the box while you are completing the
printer setup.
Remember to match the right color ink to its corresponding cartridge chamber. Once the tube is filled, there is no way to undo it!