VIDEO1 INTERFACE BOARD
■ How to Install the VIDEO INTERFACE BOARD | Plate Screws | |
2 | Loosen the two screws to remove the plate. | |
CAUTION |
| |
Turn Off the power before removing the Third Party slot plate. |
| |
Insert the board along the rails of the third party slot. Make sure that the connector is connected | ||
securely. | VIDEOINTERFACEBOARD | |
| Secure the board with two screws. | |
CAUTION
Protective measures are required to prevent damage from static electricity.
NOTICE
When the scanner power is turned On again, the scanner automatically recognizes the video interface board.
●
