7.At Screen 43, press 
or 
to change the top setting. The value changes in 1 mm units. Then press
to activate the setting. The scanner displays the next setup item.
17Color to be Read in Unicolor Reading
1.Press “Next” 
or=!“Previous1R9/ G” 
/BRandeleta/thedWscannerCodisplaylScreenor44. Screen 44
2.At Screen 44, press 
or 
to select a light source. Press 
if you want to activate the setting.
NOTICES
1.The specification from the host computer has priority. 2.The default is G (Green).
3.Press 
to return.
Screen=! 2N45 0o r | mG |
| ar al y/ F Ma | ods t e |
18 Setting the Grayscale Mode |
|
| ||
1. Press "Next" or "Previous" |
| to display Screen 45 | n the LCD. | |
2. In Screen 45, press 
or 
to select "Normal", "Fast" or "Fine".
"Normal" refers to the regular mode. When "Normal" is selected, scanning is performed at the machine defaults for image quality and speed.
"Fast" refers to the speed priority mode. When "Fast" is selected, scanning is performed at a speed faster than that of the normal mode.
"Fine" refers to the quality priority mode. When "Fine" is selected, scanning is performed at a quality higher than that of the normal mode.
The lower display of Screen 45 is switched as follows:
1.”Normal/Fast" is displayed, and "Normal" flashes.
2."Fast/Fine" is displayed, and " Fast" flashes.
3.”Fast/Fine" is displayed, and "Fine" flashes.
●
