Fujitsu fi-4340C manual Papercounter, R e a d y, Counter Display, X X, Abrasion, Function

Counter Display					Papercounter
		R e a d y			X X X XX X0 X>
The displays for the Paper and Abrasion counters are shown below:
					Abrasion	counter
Simultaneously press the		and	arrow buttons for at least 1 second, to switch to the Life counter
panel display as shown below:R e			a d y *		Lifecounter			>
					XX X X X X		0
Counter	Function
Paper counter	When the			The paper counter counts the number of scanned sheets from
	button is pressed			the start of reading until Paper Empty or an error is detected.
				The counter is automatically reset at the start of reading. The
	for at least 1 sec-
				counter is used for checking the number of the sheets scanned
	ond
				in one batch.
	When the			This counter increments each time a document is scanned. It is
	button is pressed			not initialized until the power is turned off. The counter can be
				used, for example, for checking the number of sheets that have
	for at least 1 sec-
				been scanned in one day.
	ond
Abrasion counter	The abrasion counter counts the accumulated number of scanned sheets. This
	counter increments every 10 sheets. It is useful to check the cleaning cycle or the
	parts replacement cycle. How to reset it is described in Chapter7 "SETUP MODE".
Life Counter	Keeps a cumulative count of the number of scans made after shipping.

This counter increments by 1 after every 10 scans and may be used to estimate of the device's remaining scan life.

NOTICE

When the counter value is 0, no number is displayed.

●6-2