
■Reading Mode Setting When the VIDEO INTERFACE BOARD is Installed
This section describes the button specifications and setup details for reading modes when the scanner has the VIDEO INTERFACE BOARD in the third party slot.
When the reading mode is set by the command from the host computer, the following button operation is not required.
NOTICE
When the VIDEO INTERFACE BOARD is installed in the scanner, the scanner automatically recognizes the board and changes the display.
|
| Screen M1Re | ad | y |
|
| XX | X | XX | 0X | X> | |||||
Whenever you press | , the scanner returns to screen M1. |
|
|
|
|
| ||||||||||
1. | Turn the power On and verify that “Scanner Ready” is displayed on the LCD. | |||||||||||||||
2. | Press | ScreenMM2oR | deea d | Si | en | lg | e | Mc | to | d | e0 |
|
| |||
then the scanner displays Scre | n M2. |
|
|
|
|
|
|
| ||||||||
3. | Press | Screen= 0A1 D1 | F/I | Fm | aB | g | e |
| S | o | r | r | c | e | ||
then the scanner displays Screen 1. | Dn | ug |
| lf | ace x |
| ||||||||||
4. |
| Screen= 02S2 i m | Rple | ae | dx | i/ | p | e | ||||||||
Select ADF or FB by pressing |
| or | then press |
|
| . The scanner displays Screen 2. |
5. Select “Simplex” or “Duplex” by pressing or
. Then press Enter. The scanner displays Screen 3.
Screen=0P3 o3r tO/r iLeandtat i on
●