Fujitsu fi-4340C manual Troubleshooting

Troubleshooting

This chapter describes some potential problems and solutions that may occur when using this scanner. Should any of the following problems arise, refer to the relevant section listed below.

- Power doesn’t turn on	Refer to "Chapter 5-3 Cleaning & Maintenance"
- Operator Panel goes blank	Refer to "Chapter 5-4 Cleaning & Maintenance"
- Scan doesn't start	Refer to "Chapter 5-5 Cleaning & Maintenance"
- Image or photo scan output is poor	Refer to "Chapter 5-7 Cleaning & Maintenance"
- Text or line scan output is poor	Refer to "Chapter 5-8 Cleaning & Maintenance"
- Scan image is distorted or unclear	Refer to "Chapter 5-9 Cleaning & Maintenance"
- Scan image is striped	Refer to "Chapter 5-10 Cleaning & Maintenance"
- "Check" LED turns on	Refer to "Chapter 5-11 Cleaning & Maintenance"
- "Clean pick roller" LCD message	Refer to "Chapter 5-12 Cleaning & Maintenance"
- "Clean ADF glass" LCD message	Refer to "Chapter 5-19 Cleaning & Maintenance"
- Frequent double-feeds	Refer to "Chapter 5-14 Cleaning & Maintenance"
- Frequent pick-misses	Refer to "Chapter 5-16 Cleaning & Maintenance"
- Frequent paper jams	Refer to "Chapter 5-18 Cleaning & Maintenance"

NOTICE

If the problem cannot be solved, contact your sales or service representative.

●8-2