Chapter 1. Introduction

ŠConvenient computer selection via intuitive hotkey combinations or On Screen Display (OSD) menus

ŠGraphical user interface for convenient, user-friendly operation, supported by the KA9233 Console Module and Web-based Administrator Utility

ŠDaisy-chain up to 7 additional KM0432 or KM0216 Matrix KVM Switches1

ŠAuto-sensing of station’s position on daisy-chain installations – OSD and front panel LED indicates station’s position

ŠPort names are automatically reconfigured when the station sequence is changed

ŠOSD screen automatically adjusts to resolution changes

ŠAuto Scan feature for monitoring user-selected computers

ŠSuper Administrators can view and end sessions of other users

ŠSuper Administrators can broadcast keyboard input to all computers in the KVM installation

ŠPS/2 keyboard and mouse emulation – computers boot even when the KVM console focus is elsewhere

ŠLCD, VGA, SVGA, XGA, and MultiSync support; DDC2B

ŠSuperior video quality – 1024 x 768 @ 60Hz for up to 300 m;

1920 x 1440 @ 60Hz (distance depends on installation environment)

ŠAuto Signal Compensation (ASC) assures optimum video resolution for distances up to 300 m between computers and KVM consoles – no DIP switch setting required

ŠFree lifetime firmware upgrades

ŠCompact design – rack mounts in only 1U of rack space

ŠMulti-architecture compatibility

ŠPC (x86/x64)

ŠMacintosh PowerPC

ŠSun Microsystems Sparc

ŠAllows centralized control of computers located at non-contiguous locations on the site

1. If this feature is not operative on your unit, you will need a newer version of the firmware. Contact your dealer for details.

3