Appendix

6.Remove the jumper cap from pins 1-2 of the J3 jumper.

7.Replace the cover on the KVM switch. Plug in the power cord and turn on the KM0832.

8.You should now use the default username and password to login to the KM0832 Administrator Utility and OSD.

Entering the ok Prompt (Sun Solaris)

If you are using a PC keyboard to control a Sun Solaris server and want to use Stop-A keys to enter the ok prompt, do the following:

Note: Before entering the ok prompt, consult the server’s documentation for any precautionary steps that you should take.

Press and release [Ctrl], press and hold down [T], and then press [A].

143