PN9108 User Manual
Rack Mounting
The PN9108 can be installed in most standard 19" (1U) racks. To rack mount the unit do the following:
1.Separate the front and rear modules by removing the four module attaching screws:
Phillips hex head
M3 x 8
2.Use the screws you just removed, and the ones supplied with the rack mounting kit to screw the rack mounting brackets into both modules:
Phillips hex head
M3 x 8
3.Position the device in the rack and align the holes in the mounting brackets with the hole in the rack.
4.Screw the mounting brackets to the rack.
8