PN9108 User Manual

Enable OOB operation by clicking to put a checkmark in the Out Of Band Enable checkbox.

Note: Since OOB operation and UPS operation both require the use of the RS-232 port, enabling OOB automatically disables the PN9108's UPS feature.

The dialog box offers two COM Port Connection types: Computer and Modem.

Computer Connection

This selection is for a direct connection between a local computer's COM port and the PN9108's RS-232 port.

1.For the COM Port Settings, select the baud rate that the two COM ports will use (usually 115200).

2.Click Save to set the baudrate selection that you made.

Note: Clicking Restore returns the baud rate entry to its previous setting.

3.Use a null modem cable to connect the local computer's serial port to the PN9108's RS-232 port.

Note: The null modem cable must be wired for either full or loop back handshaking. See the diagrams on page 90 for details.

You can now make a direct terminal or PPP connection to the PN9108. The procedure for making a direct terminal connection is discussed on page 50; the procedure for making a direct PPP connection is discussed on page 57.

46