PN9108 User Manual

Indirect Terminal Connection (HyperTerminal)

Connection Setup

1. Set up your hardware configuration to match the diagram, below:

PN9108

Serial Cable

Serial Cable

 

Phone Line

Remote

Operator

Modem

Modem

Note: 1. Use standard 9 pin serial modem cables to connect to the modems.

2.Connect the serial port of the modem that the PN9108 uses to its RS-232 port.

2.Create a HyperTerminal connection.

a)Start with Step 2 of the HyperTerminal Setup section (page 50).

b)For Connect Using: in Step 3, either key in the full path to your modem driver, or select Standard 28800bps Modem from the list.

c)Follow Steps 4-8 to complete the setup and create the connection icon.

This completes the HyperTerminal setup. For Windows NT, 2000, XP and Windows Server 2003 systems, a HyperTerminal icon that connects you to the PN9108 is created on the desktop. For Windows 98 and ME, you must access HyperTerminal from the Windows Start Menu.

54