Chapter 4. Administration

Service Ports:

The values shown in the dialog box are the default settings. If you change them, users must specify the port as part of the URL when logging in. If you change the http port to 81, for example, users must log in as follows:

http://10.0.100.65:81

IP Installer Settings:

To help determine and/or set an IP address for a PN9108 an IP Installer utility has been included on the PN9108 software CD. (See IP Address Determination, page 78 for operation details.) The meanings of the settings are described in the following table:

 

 

Enabled

Users can see the current IP address for the PN9108, and

 

can change its settings with the utility.

 

 

View Only

Users can see the current IP address for the PN9108, but

 

cannot change its settings with the utility.

 

 

Disabled

The PN9108 does not show up in the IP Installer’s list of

 

devices. It cannot be seen, and cannot be changed.

 

 

23