Appendix
Method 3:
A fixed IP address can also be assigned with the ARP command as follows:
1.Turn off the power to the PN9108U.
2.Enter the following command:
arp -s <ip address> <PN9108U’s MAC address>
Where the IP address that you assign is one suitable for the network segment that the PN9108U resides on.
Note: The PN9108U’s MAC address can be found on its bottom panel.
3.Turn the power to the PN9108U back on.
4.In your browser, go to the IP address you just assigned and log in with your Username and Password.
Note: You must log in within 30 seconds after entering the arp command. Therefore, it would be advisable to have your browser all set up to go to the IP address beforehand.
5.Once you have logged in, go to Network Settings to set up the permanent IP environment (see p. 23).
47
