| Chapter 4 - Administration |
|
|
Heading | Meaning |
Kill the Power | If this option is selected, the PN9108U waits for the |
| amount time set in the Power Off Delay field (see |
| below), and then turns the Outlet’s power OFF when its |
| Power Button is clicked to turn off the power. Turning the |
| power off performs a cold |
| this function disables the Reboot checkbox on the main |
| screen. |
|
|
Confirmation Required | If this option is enabled (there is a check in the |
| checkbox), a dialog box comes up asking you to |
| confirm the operation before it is performed. If it is |
| disabled (there is no check in the checkbox), the |
| operation is performed without confirmation. |
|
|
Power On Delay | Sets the amount of time the PN9108U waits after the |
| Power Button is clicked before it turns on the computer |
| attached to the corresponding outlet. |
|
|
Power Off Delay | Sets the amount of time the PN9108U waits after the |
| Power Button is clicked before it shuts down the |
| computer attached to the corresponding outlet. |
| After the delay time expires, the PN9108U waits |
| another fifteen seconds, then shuts the computer down. |
| The default delay time is 15 seconds. The maximum |
| delay time is 999 seconds. |
To save your settings and exit, Click Save. To exit without saving your changes, use your browser’s Back function to go back to the Main web page, or click another button on the page to go to a different function.
*This function only works with computers capable of a Safe Power Shutdown. See step 3 of Single Stage Installation, p 12, and Safe Shutdown and Reboot, p. 12.
29
