for one access account. No PPPoE client software is required for local computer. The Automatic Reconnect and Disconnect Timeout (Idle Timer) functions are provided, too.
•Dynamic Host Control Protocol (DHCP) client and server: In the WAN site, the DHCP client can get an IP address from the Internet Service Provider (ISP) automatically. In the LAN site, the DHCP server can allocate a range of client IP addresses and distribute them including IP address, subnet mask as well as DNS IP address to local computers. It provides an easy way to manage the local IP network.
•RIP1/2 Routing: Supports RIP1/2 routing protocol for routing capability.
•Web based GUI: Supports web based GUI for configuration and management. It is
•Quick Installation Wizard: Supports a WEB GUI page to install this
device quickly. With this wizard, end users can enter the information easily which they get from their ISP, then surf the Internet immediately.
•Packet Filtering: Up to 72 rules.•Universal Plug and Play (UPnP) e UPnP NAT Traversal: This protocol
is used to enable simple and robust connectivity among
•Virtual Server: User can specify some services to be visible from outside users. The router can detect incoming service request and forward it to the specific local computer to handle it. For example, user can assign a PC in LAN acting as WEB server inside and expose it to the outside network. Outside user can browse inside web server directly while it is protected by NAT. A DMZ host setting is also provided to a local computer exposed to the outside network, Internet.
10