Atlantis Land 111U Steps, Steps, A.2 Telnet, Corrective Action, Corrective Action, Corrective Action, A.3 WEB Configurator

Steps Corrective Action

1Check the telephone wire and connections between the ADSL Router DSL port and the wall jack.

2Make sure that the telephone company has checked your phone line and set it up for DSL service.

3Reset your ADSL line to reinitialize your link to the DSLAM. For details, refer to the Maintenance chapter (web configurator) or the System Information and Diagnosis chapter.

4If these steps fail to correct the problem, contact your local distributor for assistance.

A.2 Telnet

I cannot telnet into the ADSL Router.

Steps	Corrective Action
1	Check the LAN port and the other Ethernet connections.
2	Make sure you are using the correct IP address of the ADSL
	Router. Check the IP address of the ADSL Router.
3	Ping the ADSL Router from your computer.
	If you cannot ping the ADSL Router, check the IP addresses of
	the ADSL Router and your computer. Make sure your computer is
	set to get a dynamic IP address; or if you want to use a static IP
	address on your computer, make sure that it is on the same
	subnet as the ADSL Router.
4	Make sure you entered the correct password. The default
	password is “admin”.
	If you have forgot your username or password, refer to Section
	A.5.
5	If these steps fail to correct the problem, contact the distributor.

A.3 WEB Configurator

I cannot access the web configurator.

Steps Corrective Action

1Make sure you are using the correct IP address of the ADSL Router. Check the IP address of the ADSL Router.

91