Atlantis Land 111U NAT, Demand, Gateway, Password, User Name, Multiplex, Always ON, Connect on, IP Address, IP Address, Service Name, Get IP Address, IP Subnet Mask

Service Name	(PPPoE only) Type the name of your PPPoE service here.
User Name	Enter the user name exactly as your ISP assigned. If assigned a
	name in the form user@domain where domain identifies a service
	name, then enter both components exactly as given.
	A static IP address is a fixed IP that your ISP gives you. A dynamic
	IP address is not fixed; the ISP assigns you a different one each
Password	time you connect to the Internet. The Single User Account feature
	can be used with either a dynamic or static IP address.
	Select Obtain an IP Address Automatically if you have a dynamic IP
	address; otherwise select Static IP Address and type your ISP
	assigned IP address in the IP Address field below.
Multiplex	Select the method of multiplexing used by your ISP from the drop-
	down list. Choices are VC or LLC.
	Connection Settings
Always ON	Select Always ON Connection when you want your connection up
	all the time. The ADSL Router will try to bring up the connection
	automatically if it is disconnected.
	Connect on demand is dependent on the traffic. If there is no
Connect on	traffic (or Idle) for a pre-specified period of time), the connenct will
	tear down automatically. And once there is traffic send or receive,
Demand
	the connection will be automatically on. Please insert the Idle Time
	in minute.
	IP Address
Get IP Address	The IP address can be either dynamically (via DHCP) or given IP
	address provide by your ISP. For Static IP, you need to specify the
	IP address, Subnet Mask and Gateway IP address.
IP Address	You must specify a Router IP address.

Enter a subnet mask in dotted decimal notation.

IP Subnet Mask Refer to the Subnetting appendix in the to calculate a subnet mask If you are implementing subnetting.

Gateway	You must specify a gateway IP address.
NAT	Select this option to Activate/Deactivated the NAT (Network
	48