Field | Description |
| IP Filter set Editing |
| IP Filter set Index | This is item number |
Interface | Select which channel (PVC) to configure |
Direction | Select the access to the Internet (“Outgoing”) or from the |
| Internet (“Incoming”) or Both |
| IP Filter Rule Editing |
| IP Filter Rule Index | This is item number |
Rule Type | Select Yes from the drop down list box to enable IP filter rule |
| Active | The source IP address or range of packets to be monitored |
| Source IP Address | It is the destination IP addresses based on above destination |
| subnet IP |
Subnet Mask | This Port or Port Ranges defines the port allowed to be used |
| (Source) | by the Remote/WAN to connect to the application. Default is |
| set from range 0 ~ 65535. It is recommended that this option |
| be configured by an advanced user |
Port Number (Surce) | This is the destination subnet IP address |
| Destination IP | It is the destination IP addresses based on above destination |
Address | subnet IP |
| Subnet | It is the packet protocol type used by the application, select |
| Mask(destination) | either TCP or UDP or ICMP |
| Port | Select action for the traffic unmatching current rule; Forward |
Number(destination) to leave it pass through, and NEXT to check it by the next
| rule |
| Protocol | This is item number |
| Rule Unmatched | Select Yes from the drop down list box to enable IP filter rule |
| IP Filter Listing |
# | Item number |
Active | Whether the connection is currently activ |
| Source IP Mask | The source IP address or range of packets to be monitored |
Destination IP Mask This is the destination subnet IP address
Source port This Port or Port Ranges defines the port allowed to be used by the Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is recommended that this option
65