Factory Default Settings | Atlantis Land A02-RAV211 instruction

VoIP ROUTER ADSL

3.4 Factory Default Settings

Before configurating this ADSL VoIP Router, you need to know the following default settings.

•Username: admin

•Password : atlantis

•IP Address : 192.168.1.254

•Subnet Mask : 255.255.255.0

•DHCP server is enabled.

3.4.1 Username and Password

The default username and password are admin and atlantis respectively.

If you ever forget the password to log in, you may press the RESET button to restore the factory default settings..

3.4.2 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

15

Image 21

Atlantis Land A02-RAV211 manual Factory Default Settings, Username and Password

Contents

VoIP Router Adsl Page CE Mark Warning CopyrightImportant Note FCC Warning Table of Contents Chapter Chapter Page An Overview of the VoIP Router Adsl Introduction VoIP Router Adsl Features Package ContentsPage VoIP Router Adsl Application Rear Ports Front LEDs Cabling Connecting the VoIP Router Adsl Before Configuration For Windows 95/98/ME Configuring PC in Windows VoIP Router Adsl For Windows NT4.0 For Windows Click OK to finish the configuration For Windows XP VoIP Router Adsl Username and Password Factory Default Settings Information from the ISP Configuring with the Web Browser Quick Start Status Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status LAN Status TCP Status Status LAN Status Status- Learned MAC Table Status- PPP Status System Log Routing Table Security Logs Quick StartAdsl Quick Start Configuration VoIP Quick StartVoIP System Firewall Virtual Server Advanced 3.1 WAN VoIP Router Adsl Service Category Select UBR or CBR Dhcp Client Static IP SettingsMAC Spoofing 3.2 LAN Dhcp Server Device IP Address VoIP VoIP Router Adsl AuthorizationUserID Same as UserID Phone Book Call Feature CallWaiting Enable/Disable the call waiting featureCallForwarding CallReturn Enable/Disable the call return feature Advanced Telephony Settings Configure Caller ID info Echo Cancellation Tail Length Setting the Tail Length Ring & Tone Configuration Timeouts System Time Zone Password Upgrade Factory SettingRestart Packet Filtering Firewall VoIP Router Adsl Intrusion Detection Bridge Filtering Block WAN Request Advanced Virtual Server 3.7.2 DNS Adsl Dynamic DNS 3.7.4 NAT VoIP Router Adsl 3.7.5 RIP RIP Default is Disabled Border Gateway Default is Enabled Static Route Dhcp Relay Default at Dhcp Server Dhcp Target IP Default is Misc Configuration Igmp Proxy Default at Disabled Diagnostic TestTesting Ethernet LAN connection Testing Adsl Synchronization Test ATM OAM End-to-End Loop Back Test ATM OAM Segment Loop BackTest Ethernet connect to ATM Test IP connect to PPP Test Internet connection Save Config Problems with the WAN Interface Problems with the LAN InterfaceProblem Corrective Action Technical Features Support Appendix B