VoIP Router Adsl | Atlantis Land A02-RAV211 specification

VoIP ROUTER ADSL

Virtual Circuit

Virtual Circuit: Enable/Disable the settings of this VC.

Bridge: If you set this device to be bridge mode, select Enable; if not, please select Disable.

IGMP: You can Enable or Disable this function.

26

Image 32

Atlantis Land A02-RAV211 manual VoIP Router Adsl

Contents

VoIP Router Adsl Page Copyright CE Mark WarningImportant Note FCC Warning Table of Contents Chapter Chapter Page Introduction An Overview of the VoIP Router Adsl Package Contents VoIP Router Adsl FeaturesPage VoIP Router Adsl Application Front LEDs Rear Ports Cabling Before Configuration Connecting the VoIP Router Adsl Configuring PC in Windows For Windows 95/98/ME VoIP Router Adsl For Windows NT4.0 For Windows Click OK to finish the configuration For Windows XP VoIP Router Adsl Factory Default Settings Username and Password Configuring with the Web Browser Information from the ISP Status Quick Start Status Adsl Status Adsl Status WAN Status Adsl Status ATM Status Status LAN Status LAN Status TCP Status Status- PPP Status Status- Learned MAC Table Routing Table System Log Adsl Quick Start Security LogsQuick Start VoIP System Firewall Virtual Server Advanced ConfigurationVoIP Quick Start 3.1 WAN VoIP Router Adsl MAC Spoofing Service Category Select UBR or CBR Dhcp ClientStatic IP Settings 3.2 LAN Device IP Address Dhcp Server VoIP VoIP Router Adsl AuthorizationUserID Same as UserID Phone Book CallForwarding Call FeatureCallWaiting Enable/Disable the call waiting feature Advanced Telephony Settings CallReturn Enable/Disable the call return feature Configure Caller ID info Echo Cancellation Tail Length Setting the Tail Length Ring & Tone Configuration Timeouts System Password Time Zone Restart UpgradeFactory Setting Firewall Packet Filtering VoIP Router Adsl Bridge Filtering Intrusion Detection Block WAN Request Virtual Server Advanced Adsl 3.7.2 DNS Dynamic DNS 3.7.4 NAT VoIP Router Adsl RIP Default is Disabled Border Gateway Default is Enabled 3.7.5 RIP Static Route Misc Configuration Dhcp Relay Default at Dhcp Server Dhcp Target IP Default is Diagnostic Test Igmp Proxy Default at DisabledTesting Ethernet LAN connection Testing Adsl Synchronization Test ATM OAM Segment Loop Back Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Test IP connect to PPP Save Config Test Internet connection Problem Corrective Action Problems with the WAN InterfaceProblems with the LAN Interface Technical Features Appendix B Support