Manuals / Atlantis Land / Computer Equipment / Network Router

Atlantis Land A02-RAV211 manual Before Configuration, Connecting the VoIP Router ADSL, Chapter

Models: A02-RAV211

1 66

Download 66 pages 21.33 Kb

Page 13

Configuration

VoIP ROUTER ADSL

Chapter 3

Configuration

The ADSL VoIP Router can be configured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface for configuration.

3.1 Before Configuration

This section describes the configuration required by LAN-attached PCs that communicate with the ADSL VoIP Router, either to configure the device or for network access. These PCs must have an Ethernet interface (or VoIP adapter) installed properly, be connected to the ADSL VoIP Router either directly or through an external repeater hub, and have TCP/IP installed and configured to obtain an IP address through a DHCP server or a fixed IP address that must be in the same subnet of the ADSL Firewall Router. The default IP address of the ADSL VoIP Router is 192.168.1.254 and subnet mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP address from the ADSL VoIP Router. Also make sure you have UNINSTALLED any kind of software firewall that can cause problems while accessing the 192.168.1.254 IP address of the router.

Please follow the steps below for PC’s network environment installation. First of all, please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows related manuals.

Any TCP/IP capable workstation can be used to communicate with or through the ADSL VoIP Router. To configure other types of workstations, please consult the manufacturer’s documentation.

3.2 Connecting the VoIP Router ADSL

•Connect the Router to a LAN (Local Area Network) and the ADSL/telephone network.

•Power on the device

•Make sure the PWR (SYS LED is blinking) is lit steady & LAN LED is lit.

•Before taking the next step, make sure you have uninstalled any software firewall.

7

Image 13

Atlantis Land A02-RAV211 manual Before Configuration, Connecting the VoIP Router ADSL, Chapter

Contents

VoIP ROUTER ADSL USER’S MANUALA02-RAV211 A02-RAV211ME01Page Copyright VoIP ROUTER ADSLCE Mark Warning Important Note3.4.1 Username and Password TABLE OF CONTENTSCHAPTER CHAPTERPROBLEMS WITH THE WAN INTERFACE 3.6.3.3.4 ADVANCED TELEPHONY SETTINGSPROBLEMS WITH THE LAN INTERFACE CHAPTERPage Chapter Introduction1.1 An Overview of the VoIP Router ADSL 1.3 VoIP Router ADSL Features 1.2 Package ContentsIf any of the above items are missing, please contact your reseller VoIP ROUTER ADSL Universal Plug and Play UPnP and UPnP NAT Traversal This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web to enable seamless proximity networking in addition to control and data transfer among networked devices. With this feature enabled, users can now connect to Net meeting or MSN Messenger seamlessly VoIP ROUTER ADSL 1.4 VoIP Router ADSL ApplicationLit green when power adapter is connected 2.1 Cautions for using the VoIP Router ADSLWhen flash, it indicates that the device is working properly Lit green when the phone is off hookPower Jack Power SwitchReset RJ-45 connector3.1 Before Configuration Configuration3.2 Connecting the VoIP Router ADSL ChapterFor Windows 95/98/ME 3.3 Configuring PC in WindowsVoIP ROUTER ADSL 5. Then select the DNS Configuration tab2. Select TCP/IP Protocol and click Properties For Windows NT4.0VoIP ROUTER ADSL 2. Double-click LAN Area Connection For Windows3. In the LAN Area Connection Status window, click Properties VoIP ROUTER ADSL6. Click “OK” to finish the configuration 4. Select Internet Protocol TCP/IP and click PropertiesVoIP ROUTER ADSL Network Connections 2. Double-click Local Area Connection For Windows XPVoIP ROUTER ADSL 3. In the LAN Area Connection Status window, click Properties4. Select Internet Protocol TCP/IP and click Properties VoIP ROUTER ADSL3.4.1 Username and Password 3.4 Factory Default Settings3.4.2 LAN and WAN Port Addresses Enabled 3.6 Configuring with the Web Browser3.5 Information from the ISP WAN PortQuick Start 3.6.1 StatusVoIP ROUTER ADSL 3.6.1.1 Status - ADSL StatusVoIP ROUTER ADSL 3.6.1.1.1 ADSL Status - WAN Status 3.4.1.1.2 ADSL Status - ATM Status3.6.1.2.1 LAN Status - TCP Status 3.6.1.2 Status - LAN StatusVoIP ROUTER ADSL Displays the status of your Local Area Network LAN connection3.6.1.4 Status- Learned MAC Table 3.6.1.3 Status- PPP Status3.6.1.6 System Log 3.6.1.5 Routing TableVoIP ROUTER ADSL Display the current routing paths of A02-RAV2113.6.2 Quick Start 3.6.1.7 Security Logs3.6.2.1 ADSL Quick Start 3.6.2.2 VoIP Quick Start 3.6.3 ConfigurationWAN LAN VoIP System Firewall Virtual Server Advanced VoIP ROUTER ADSL 3.6.3.1 WANSelect Adapter Virtual Circuit Virtual Circuit Enable/Disable the settings of this VCIGMP You can Enable or Disable this function VoIP ROUTER ADSLStatic IP Settings Service Category Select UBR or CBR DHCP ClientMAC Spoofing 3.4.3.2 LAN DHCP Server Device IP Address3.6.3.3 VoIP Registration Interval specify the re-registration interval in seconds AuthorizationUserID Same as UserID 3.6.3.3.1 Configuration3.6.3.3.2 Phone Book CallWaiting Enable/Disable the call waiting feature 3.6.3.3.3 Call FeatureCallForwarding CallReturn Enable/Disable the call return feature 3.6.3.3.4 Advanced Telephony SettingsVoIP ROUTER ADSL Configure Caller ID info Echo Cancellation Tail Length Setting the Tail Length 3.6.3.3.5 Ring & Tone Configuration Ring Tone Action a drop-down selection Display, Add, Edit, Delete 3.6.3.3.7 Timeouts3.6.3.4 System 3.6.3.4.2 Time Zone 3.6.3.4.1 Password3.6.3.4.4 Factory Setting 3.6.3.4.3 Upgrade3.6.3.4.5 Restart 3.6.3.5.1 Packet Filtering 3.6.3.5 Firewallpackets Outgoing3.6.3.5.3 Intrusion Detection 3.6.3.5.2 Bridge FilteringIP Spoofing Ping of Death Length 3.6.3.5.4 Block WAN RequestLand Attack Same source / destination IP address IP with zero length Sync flooding Smurf Attack ICMP Echo with x.x.x.0 or Snork Attack3.6.3.7 Advanced 3.6.3.6 Virtual Server3.6.3.7.2 DNS 3.6.3.7.1 ADSL3.6.3.7.3 Dynamic DNS 3.6.3.7.4 NAT VoIP ROUTER ADSL 3.6.3.7.5 RIP RIP Default is Disabled Border Gateway Default is EnabledVoIP ROUTER ADSL 3.6.3.7.6 Static Route HTTP server access Default at Restricted HTTP server port Default at 3.6.3.7.7 MISC ConfigurationFTP server Default at Enabled TFTP server Default at Disabled DHCP Relay Default at DHCP Server DHCP Target IP Default isIGMP Proxy Default at Disabled 3.6.3.7.8 Diagnostic TestTesting Ethernet LAN connection Testing ADSL SynchronizationTest ATM OAM Segment Loop Back Checking Circuit 0 for Network ConnectionTest ATM OAM End-to-End Loop Back Test Ethernet connect to ATMTest Internet connection 3.6.4 Save ConfigProblems with the WAN Interface TroubleshootingProblems with the LAN Interface ProblemLED Indicators Technical FeaturesInput Power Power ConsumptionSupport APPENDIX BAtlantis Land SpA Viale De Gasperi, 122 20017 Mazzo di RhoMI Tel +39. 02.93906085, +39. 02.93907634help desk Fax +39