Samsung HMX-QF22BP/XER manual Connecting to a Wlan, Press the Home button p touch Social Sharing

Connecting to a WLAN and configuring network settings

Connecting to a WLAN

You can connect to a WLAN using an AP (access point) in the wireless network service area.

1Press the [Home ( )] button p touch Social Sharing.

•To begin this process, you must have some video or photo files stored in the camcoder’s memory card that you have not uploaded to a social network or photo/video file management site.

2Touch the Wi-Fi setting ( ) tab on the bottom left.

•The camcorder automatically searches for and then displays available AP devices.

•If the desired AP is not on the AP devices list, drag the list down to the bottom, and then touch Add Wi-Fi Network to input and then search for the desired AP name manually.

3To select an unsecured AP or an AP that requires a password, touch the AP. If you selected an unsecured

AP, go to Step 7. If you selected an AP that requires a password, go to Step 4.

To select a WPS supported AP, touch the tab next to the AP, and then go to Step 5.

•You can also connect to a WPS supported AP by dragging the list of APs down to the bottom, touching WPS PBC, and then pressing the [WPS] button on the AP device.

4The virtual keyboard appears. Input the required password using the virtual key board. ¬page 75

When done, press OK, and then go to Step 7.

Wireless network (HMX-QF20 only)

5The Wi-Fi Setting screen appears. Scroll to the bottom of the screen, and then touch WPS PIN.

6Record the PIN code displayed on the screen, and then enter the PIN code at the Wi-Fi access point within two

minutes.

7The camcorder connects to the network you have chosen.

Icon	Description
	Ad hoc AP
	Secured AP
	WPS AP
	Signal strength
	Wi-Fi setting options
	Refreshing connectable APs

You can check the signal strength in the top right corner of the screen.

Icon	Signal strength
	Not connected
	Very weak
	Weak
	Normal
	Very strong

72