Settings menu
General
* : Default
ItemDescription
Use to delete all files completely of correct problems on the storage media.
• Do not remove the storage media or perform any other operation (such as turning off the power) during formatting. Also, be sure to use the provided
* : Default
Item | Description |
| Reset all menu settings to the default conditions |
| (factory settings). |
| Touch Yes if you want all the settings returned to the |
Default Set | defaults. |
| • Do not turn off the power while using this function. |
AC power adaptor, as the storage media may be corrupted if the battery becomes exhausted during formatting.
| • If the storage media becomes corrupted, format it | |
|
| again. |
Format | • | Do not format the storage media on a PC or other |
| device. Make sure to format the storage media on this | |
|
| |
|
| camcorder. |
• | You cannot format a memory card with the protection |
| tab set to lock. page 17 |
• | If there is no storage media inserted, you cannot |
| select the Format function, and its name will be |
| dimmed on the menu. |
Language
•Initialising the camcorder settings to factory defaults does not affect recorded images.
Select the language the camcorder uses to display the menu and messages. page 29
Show the major demo functions for the camcorder.
•Off: Disables the function.
•On*: Enables the Demo function.
The Demo mode is canceled in the following cases:
-If the LCD screen is touched.
-If you press any button (Recording start/stop,
Home (
), etc.). However, the camcorder enters
• Formatting completely deletes all files and options on |
a memory card, including protected files. By deleting |
all files and options, formatting typically corrects |
problems, enabling stable read/write speeds and |
operation. |
Demothe Demo mode automatically after 5 minutes in STBY mode if it is idle for 5 minutes without an operation. If you don’t want the Demo function to start, set Demo to Off.
The Demo function does not work in the following case:
-If you set Auto Power Off to 5 Min and you are using the battery to power the camcorder, the Auto Power Off function turns the camcorder off before the Demo function runs.
Settings 106