Samsung HMX-QF20BP/XIL manual Connecting to a Wlan and configuring network settings, Touch

Connecting to a WLAN and configuring network settings

Configuring the network settings 5 Touch the tab.

You can configure network settings manually. Note that configuring these settings manually is not necessary in most cases. If your camcorder connected to the network after you followed the directions on page 72, your camcorder has adjusted these settings and you do not need to configure them manually.

1Press the [Home ( )] button p touch Social Sharing.

2Touch the Wi-Fi setting ( ) tab.

• The camcorder automatically searches for available AP devices.

3Touch the tab next to an AP.

•The camcorder connects to the network via the selected AP.

• Even if AP authentication and Data Encryption have been detected, set the authentication mode to Open or Shared.

•If the camcorder does not detect the AP automatically, you can set the network properties directly. ¬page 74

•Data encryption settings by authentication type are below:

-Open p Disabled or WEP

-Shared p WEP

-WPA-PSK p TKIP, AES, or TKIP/AES Mixed

•When the Data Encryption function is set to WEP or TKIP for 802.11n AP connection, you can access in the 802.11g mode. In the 802.11g mode, the network connection and speed are not guaranteed.

Wi-Fi Setting

Samsung 1

Samsung 2

Samsung 3

Samsung 4

4Touch each submenu and enter the required information.

Item	Description
	Select an authentication type according to your AP’s setting.
Authentication	When you select Open or Shared, WPA is automatically
	set.
Data Encryption	Select an encryption type according to your AP’s setting.
Network	Enter the password using the virtual keyboard. ¬page 75
Password
IP Setting	The default is Auto. You can select Manual to set the IP
	address manually.
	Wireless network (HMX-QF20 only) 73