Troubleshooting
Recording
Symptom | Explanation/Solution | ||
During recording, the date/time does not | • Date/Time Display is set to Off. Set the Date/Time Display to On. page 102 | ||
display. | |||
|
| ||
|
| ||
| • Set your camcorder to the photo recording mode. page 41 | ||
You cannot record a photo image. | • Release the lock on the | ||
• | The storage media is full. Use a new memory card or format the storage media. | ||
| |||
|
| page 106 Or remove unnecessary images. page 65 | |
|
| ||
You don’t hear the shutter sound when you | • Set Shutter Sound to On. | ||
• | When the micro HDMI cable or Audio/Video cable is connected to the camcorder, the | ||
record a photo image. | |||
| Shutter Sound is not available. | ||
|
| ||
|
| ||
| • Set Beep Sound to On. | ||
You don’t hear the beep sound. | • Beep sound is temporally off while recording videos. | ||
• | When the micro HDMI cable or Audio/Video cable is connected to the camcorder, the Beep | ||
| |||
|
| Sound is not available. | |
|
|
| |
There is a time difference between the point | • | On your camcorder, there may be a slight time delay between the point when you press the | |
where you press the [Recording start/stop] | |||
| [Recording start/stop] button and the actual point where the recorded video starts/stops. | ||
button and the point where the recorded video |
| ||
| This is not an error. | ||
starts/stops. |
| ||
|
| ||
|
| ||
Horizontal stripes appear on the images. | • This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury | ||
| lamp. This is not a malfunction. | ||
|
| ||
|
|
|
Appendixes 116