4
USING THE CAMERA ADAPTER (OPTIONA L)
To use your Night Shadow with a 35-mm camera or camcorder you will need the following:
1) If you plan to use a camcorder then ca mcorder must have a MACRO feature. Mo st modern
camcorders today have a MACRO feature built in.
2) If you plan to use a 35-mm camera you will need a MACRO lens . If you don’t have one we
advise you to contact your local camera store.
3) You may or may not need a STEP-UP or STEP-DOWN ring in order to adapt th e camera
adapter to your lens.
NOTE: The camera adapter comes with 37-mm and 52-mm threads. If you need other sizes your
local camera store should be able to help.
• Remove the rubber eyecup from the Night Shadow
• Screw the camera ad apter onto the front of the len s on your Video cam era lens or your
35-mm camera lens.
• Loosen the three set screws on the camera adapter.
• Place the camera adapter over the Night Shadow eyepiece.
• Tighten the three set screws to fit snugly to the Night Shadow eyepiece
• You may need to focus the 35-mm camera or video camera in combination wi th the Night
Shadow in order to get the sharpest image possible.
• We suggest that you find an open space to work in. Fo cus the init so that the scene is at its
sharpest. For the best results you should disable the auto focus (if any) on either the 35-mm
camera or the video cam era and manually foc us the 35-mm camer a or the video camera.
Once the image is in sharp simply adjust the Night Shadow front lens to change focus.
*An important part to remember is that you are not taking a picture of the object that is far away
from you, but you are actually taking a picture of the phosphorous sc reen of the Night Shadow
that is only 2-3 inches away.
Camera adapter
Screw
Joint ring