Using Media Browser
Setting the wireless network in the computer
4 * Set the computer SSID (Network name), WEP key, and connection mode as follows by referring to the User’s Manual for the wireless LAN card (or, Access Point(AP)) that you purchased.
When using the wireless LAN card
1SSID (network name)
*Set to “LGMB”
2 Set WEP key as ‘Not in Use’.
3Set the Connection Mode as ‘Networking between computers
4Setting Internet protocol TCP/IP
Choose one of the following two setting methods.
u‘Obtain an IP address automatically’
Performance can drop when connecting the computer to the wireless TV through wireless connection – up to 2 minutes delay.
u‘Use the following IP address (manual)’ (recommended) IP address: 169.254.XXX.XXX (Input any number between 1
and 254 for XXX.) e.g., 169.254.45.200
Subnet mask: 255.255.0.0
Gateway: Do not input any IP.
When setting is complete, do not turn off the wireless TV but install the Media Library as described in step 5.
When using the Access Point(AP)
*Make sure to read the User’s Manual of the Access Point(AP) provided by the vendor before setting the Access Point(AP).
1) Setting the Access Point(AP)
1SSID (Network name)
•Use the existing SSID(network name) without change, or input new SSID(nerwork name)
2 Set WEP key as ‘Not in Use’.
3Setting Internet protocol TCP/IP
•Set the Access Point(AP) IP address as 192.168.0.1 and subnet mask as 255.255.255.0.
•If Access Point(AP) provides the DHCP Server function, activate it. (recommended)
2)Setting the computer
•Connect the Access Point(AP) to the computer using the Ethernet cable.
1Setting Internet protocol TCP/IP
Choose one of the following two setting methods.
•‘Obtain an IP address automatically’
If you have activated the DHCP Server function when setting the Access Point(AP), select the ‘Obtain an IP address automatically’ option.
•‘Use the following IP address (manual)’ (recommended)
Set as follows if you have not activated the DHCP Server function when setting the Access Point(AP) or the Access Point(AP) does not provide it. IP address: 192.168.XXX.XXX (Input any number between 2 and 254 for
XXX.) e.g., 192.168.0.200
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1.
To be continued on the next page.
45
