Using Media Browser

Using Media Browser

 

 

 

Setting the wireless network

There are two methods for setting the wireless network.

Setting method 1 If you use the wireless LAN card for the first time, take the steps described in the ‘Setting method 1’.

Setting method 2 If you’re familiar with wireless LAN card use, take the steps described in the ‘Setting method 2’. (See page 50)

To use the Media Browser on your wireless TV, you will first need to configure your computer network and install the Media Library software. If your computer does not have a wireless LAN card, one will need to be purchased and installed.

You should purchase the wireless LAN card (or Access Point(AP)) separately 802.11g adaptor (or 802.11g Access Point(AP)) that complies with Wi-Fi. You cannot use the 802.11a wireless LAN card (or, 802.11a Access Point(AP)) for this wireless TV.

We recommend that you use the USB type adaptor that is easy to configure, or the wireless LAN card that runs in 802.11g only.

Setting method 1

1

2

Connect the power to the wireless TV.

Turn on the wireless TV.

or

 

Power cord

Wireless TV

DC power adaptor

 

Switch to the ‘Media Browser’ 'SERVER FINDING' or 'SEARCH FAILURE' window by pressing TV/MEDIA button. will appear on the TV screen as shown in the figure.

Do not click the [OK] on the screen but take the following steps.

or

Upper side of the wireless TV

Remote control

Remote control

43

Page 43
Image 43
LG Electronics 15LW1RA manual Using Media Browser, Setting the wireless network