Chapter 5 Start Using
<Note>: Please adjust it to be suitable for the local voltage frequency of 50/60Hz. For the frequency in actual use, please refer to the manual. (Attachment 1)
1.Remove the lens cap.
2.Pull up the camera and the camera arm. The camera should aim at the center of the presenter.
3.Pull up the lamp arm to a proper position.
4.Place an object to be displayed under the camera.
5.Press [POWER] 
on the remote control or control panel to power on.
6.Press [AUTO TUNE] 
on the control panel to optimize the image. You are ready to present.
7.Each time the camera head is moved, press [AF] 
on the remote
control or control panel to refocus the lens.
<Note>: According to your request, you can adjust the camera head slightly to aim at the center of the documents when the anchor of lens was reached.
When using the remote control, aim at the receptor on the PS750, and press the power button.
Once PS750 is turned on, the LED on the control panel will flash a few times and stay lit. Please contact your distributor if the LED is not on.
English - 14
