5.Press [PLAYBACK] to return to image thumbnails.
6.Repeat Steps 2 ~ 4.
7.Press [MENU] to exit.
8.18I would like to resume the factory default setting (Factory Reset)
8.18.1 Use the OSD menu
1.Press [MENU] on the remote control or control panel to enter the setting menu.
2.Press [] or [] to the [Advanced] menu.
3.Press [] to the [Factory Reset].
4.Press [] or [] to select [Yes].
5.Press [ENTER] to activate.
8.18.2 Use Compound Key
1.Use the remote control or control panel, and press [Enter + Auto Tune] simultaneously to restore the initial value.
8.19I would like to reduce the image noise (Projector Type)
1.This function enables Document Camera to automatically clear image noise. The noise is especially obvious when Document Camera is connected to a DLP projector. You can set the DLP projector to improve the image quality.
2.If there is special noise when VGA out is connected, please set DLP option to improve the image quality.
3.Press [MENU] on the remote control or control panel to enter the setting menu.
4.Press [] or [] to the [Setting] menu.
5.Press [] to enter [Projector Type].
6.Press [] or [] to select [LCD/DLP].
7.Press [MENU] to exit.
English - 28
