Lumens Technology PS750 Would like to view the X-ray film, Would like to compare images PBP

8.15.2 Setting delay time

1.Press [MENU] on the remote control or control panel to enter the setting menu.

2.Press [] or [] to the [Storage] menu.

3.Press [] to find [Delay].

4.Press [] or [] to select image switch mode between [0.5 Sec / 1 Sec / 3 Sec / 5 Sec / 10 Sec / Manual].

5.Press [MENU] to exit.

8.15.3 Activating/Stopping the slide show

<Note> Images over 8 MB, cannot be played.

If you use the remote control or the control panel:

1.Press [SLIDE SHOW] to start playing.

2.Press [SLIDE SHOW] again to stop playing.

8.16I would like to view the X-ray film

1.Place an X-ray film to be displayed under the camera.

2.Press [Lamp] button on the control panel to switch on the Backlight (in the sequence of arm lamp/backlight/OFF)

3.Press [AUTO TUNE] button to optimize the image.

8.17I would like to compare images (PBP)

This function will compare and contrast a live image with a captured image.

C1	C2
C3	C4

C5

C6

C7

Captured Image Live Image

Use Remote control

1.Press [PBP] to enter the PBP (Picture by Picture) photo selection screen.

2.Press [] or [] or [] or [] to select the file to be compared.

3.Press [ENTER] to activate image comparison.

4.Press [] or [] to move the image left or right.

<Remark> Press [ENTER] to switch between the captured and live images.

English - 27