ATON A275 #1, A275 #2, Line Ouputs, From Audio Output Source, RCA Patch Cable RCA Patch Cable

A T O N A275 INSTALLATION MANUAL

Line Ouputs

A stereo or monaural audio signal connected to the A275’s main LINE INPUT is routed to the A275’s RCA Line Outputs. This feature is excellent for standalone distributed audio systems where one source (i.e. an A/V Receiver) is providing audio to the entire home, and also for ATON multi-room applications where a zone’s audio signal needs to be routed to multiple amplifier channels. Examples of both these applications are shown in the Chapter 2.

Line audio outputs enable connection of additional amplifiers to allow further system expansion. Use high quality RCA interconnect cables to ensure low noise and great sound. The A275 Line Outputs are buffered, a maximum of four amplifiers may be 'daisy-chained' to each Line Outputs.

A275 #1

A275 #2

From Audio

Output Source

RCA Patch

Cable

RCA Patch

Cable

To A275s #3-4

Figure 3-2: Line Outputs

© ATON 2010 • All rights reserved. Page 9