CyberChiller Series Installation, Operation & Maintenance Manual

2.0INSTALLATION2.1Receiving the Equipment

Your CyberChiller system has been tested and inspected prior to shipment. To ensure that your equipment has been received in excellent condition, make a visual inspection of the equipment immediately upon delivery. Carefully remove the shipping container and all protective packaging. Open the access doors and thoroughly inspect the unit interior for any signs of transit-incurred damage. If there is shipping damage, it must be noted on the freight carrier's delivery forms BEFORE signing for the equipment. Any freight claims MUST be done through the freight carrier. SATS ships all equipment FOB factory. SATS is not liable for any equipment damage while in transit. SATS can assist in the claim filing process with the freight carrier. Should any such damage be present, notify the SATS Product Support Group prior to attempting any repairs. Refer to section five of this manual for instructions.

Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies to appropriate authority.

A Data Package has been sent with your unit. It contains this manual, a supplemental microprocessor controller manual, system drawings, applicable MSDS’s, other component manuals, warranty registration and other applicable instructions based on the configuration and options of your unit. The data package has been placed in your unit in a clear plastic envelope. These documents need to be kept with the unit for future reference.

NOTE

Items that have been shipped loose, such as controllers, temperature sensors, water detec- tors, etc., are shipped inside the air conditioner unless specified otherwise by the customer. Unpack and store these items in a safe place unless you are using them immediately.

2.2Site Preparation

CyberChiller systems are designed with easy service access in mind. Component access doors are located on the front of the unit.

In order to have full service access through the front, no permanent obstructions should be placed within 40 inches of the front of unit.

NOTE

Working clearance requirements need to be established prior to the mounting of the unit. Refer to local and national electrical codes.

2.3Rigging

The CyberChiller systems are designed to be kept in the vertical position. Move the unit with a suitable device such as a forklift, pallet jack or roller bar and dollies. Weight tables are provided on the installation drawings. Units are shipped on a skid to facilitate moving prior to installation. Units should always be stored indoors in a dry location prior to installation.

CAUTION

Units must be kept level and in the vertical position when lifting to prevent damage to the unit.

2.4Mounting/Placement

Position unit in the desired location. CyberChiller systems are 100% front accessible, which allows the units to be placed in a corner or between cabinetry. (See Figure 2.)

NOTE

Allow access to the unit for routine operation, servicing and for necessary maintenance.

Figure 2- Typical Installation

2-1

 

 

 

(©October, 2006)