Audio Analogue SRL maestro owner manual Functions Specific to the Remote Control, A C K

12

T R A C K T O TA L R E M T I M E

PROGRAM SCAN SHUFFLE A B REPEAT 1 PAUSE EDIT

	TRACK			TOTAL	REM	TIME
PROGRAM	SCAN SHUFFLE	A	B	REPEAT 1	PAUSE	EDIT
	TRACK			TOTAL	REM	TIME
PROGRAM	SCAN SHUFFLE	A	B	REPEAT 1	PAUSE	EDIT

TRACK	TOTAL	REM	TIME
PROGRAM SCAN SHUFFLE	A B REPEAT 1	PAUSE	EDIT

TRACK TOTAL REM TIME

PROGRAM SCAN SHUFFLE A B REPEAT 1 PAUSE EDIT

FUNCTIONS SPECIFIC TO THE REMOTE CONTROL

The REPEAT key (both on the front panel and on the remote control) allows either the current track or the whole disc to be replayed. If pressed once, the "REPEAT" symbol appears on the display and the whole disc wilI be repeated continuously; if pressed a second time, the " 1 " symbol appears, indicating that the current track only will be replayed continuously; a third pressure on the key will clear the function.

Il pulsante REPEAT (sia sul pannello anteriore che sul telecomando) permette di ripetere continuamente il brano attuale oppure tutto il disco. Se premuto una volta sola, il simboli “REPEAT “ compare sul display e líintero disco (o l’insieme dei brani selezionati dal programma) viene ripetuto continuamente: se premuto una seconda volta, compare il simbolo “ 1 ", indicando che il solo brano attuale verrà ripetuto continuamente, una terza pressione del pulsante riporta il lettore al normale funzionamento.

The MODE key allows to select the operation mode (internal or external source, digital output mode and loop mode) of this unit. More details will be explained in the section

OPERATION MODES SELECTION.

Il pulsante MODE permette di selezionare la modalità di funzionamento di questo apparecchio (sorgente interna o esterna, uscita digitale e loop). I dettagli verranno spiegati nella sezione SELEZIONE DELLE MODALITA’ DI FUNZIONAMENTO

The STOP key stops operation both in playback and pause modes; it also cancels the repeat mode, if selected and deletes the program when pressed twice.

Il pulsante STOP arresta il funzionamento sia in riproduzione che in pausa, inoltre, annulla la funzione "repeat", se impostata e cancella il programma se permuto due volte.

Time display seIection. Normally, the display shows the time elapsed during the current track. If the TIME key is pressed once, the “TOTAL” symbol appears on the left of the “TIME” symbol and the total time elapsed from the beginning of the CD or the program. If the key is pressed again, the “REM” symbol appears beneath the “TOTAL” and “TIME” symbols and the total time remaining to he end of the disc or the program disc wilI be displayed. lf the key is pressed for a third time, the normal display is restored and the “TOTAL” and “REM” symbols disappear.

Numeric Keypad. Tracks can be accessed directly using the corresponding key. Over track 9, press trackís digits sequentially. Example: for track 15, press “1“, then “5" within a couple of seconds.

Programming. A program consists of a collections of track. When a program is stored in the CD player’s memory, only the tracks collected in the program can be accessed, until the program is deleted by pressing the STOP key when the CD is already stopped. To create a program, stop CD and operate as follows:

2 press the “PROGRAM” key on the remote control: the “PROGRAM” symbol will appear and the track counter will indicate the total number of tracks selected, while the time counter will show the total program time;

3 repeat steps 1 and 2 until all the desired tracks have been selected in the program. During the programming process the “PROGRAM” symbol will flash. After programming, the symbol “PROGRAM” stops flashing. At this point it is possible to review the list of selected tracks by pressing the PROGRAM key. Tracks donít need to be in the same order as in the usual CD listing: it is possible to read track 5 after track 9 just selecting track 9 before track 5. The scan function is not available when a program has been stored.

Disc Scan. It is possible to listen to the first seconds of every track in the CD by pressing the SCAN key on the remote control. After completion of the function or when the STOP key is pressed, the CD stops. It is possible to defeat the function, thus continuing to listen to a track, by pressing the SCAN key again.