SAFETY PRECAUTIONS AND MAINTENANCE
PRECAUZIONI PER LA SICUREZZA E MANUTENZIONE
16
Avoid opening the unit - No further servicing than that described in this manual should be attempted. Refer all servicing to authorised Audio Analogue dealers and qualified technicians.
Do not expose the unit to heat - Keep it away from heat sources such as direct sun, cookers, radiators, etc.
Do not use the unit near water or in excessively humid or dusty areas. Do not allow Iiquids to spill on the unit.
Before
Before plugging in, make sure the power switch on the rear panel is on the “OFF” position.
AIways earth this unit - As its enclosure is made of metal, a faulty or missing earth may be dangerous.
Unplug the unit from mains if unused for Iong periods.
Always replace fuses with same type - Bypassing fuses may represent a safety hazard.
Cleaning the unit - Always switch off and unplug before cleaning; wipe gently with a soft, dry cloth. Never use any solvents or
For the UK OnIy
To fit a mains plug, please follow these instructions:
The wires in the mains Iead are coloured in accordance with the following code:
- Green/Yellow | Earth (E) |
- Blue | Neutral (N) |
- Brown | Live (L) |
As the colours of the wires in the mains Iead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol …, or coloured green and yellow;
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black;
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
13 Amp plugs must have a 3 Amp fuse fitted.
Non aprire l'apparecchio - Nessun ulteriore intervento oltre quelli descritti in questo manuale dovrebbe essere effettuato. Per l'assistenza tecnica, rivolgersi a un tecnico qualificato o a un rivenditore Audio Analogue.
Non esporre l'apparecchio a calore - Tenete l'apparecchio lontano da fonti di calore come la luce solare, cucine, radiatori, etc..
Non usare l'apparecchio in prossimità di acqua o in zone eccessivamente umide o polverose.
Non far cadere liquidi sull'apparecchio.
Prima di alimentare l'apparecchio, controllate che la tensione di alimentazione indicata sul pannello posteriore corrisponda a quella locale di rete! - Non alimentate mai l'apparecchio con una tensione di rete maggiore di quella
Prima di inserire la spina nella presa a muro, assicurarsi che l'interruttore di accensione sia in posizione “OFF”.
L'apparecchio deve essere sempre collegato a terra - Poiché l'involucro é costruito in metallo, una connessione di terra difettosa o mancante potrebbe essere pericolosa. In caso di lunghi periodi di inutilizzo, staccate la spina dalla presa di rete.
Sostituite i fusibili sempre con altri dello stesso tipo - "Ponticellare" i fusibili può essere pericoloso.
Pulizia dell'apparecchio - Spegnete sempre prima di pulire: strofinate delicatamente con un panno morbido e pulito. Non usate mai solventi o detergenti a base di alcool. Condensa - Se il lettore viene trasportato da un ambiente freddo ad un altro caldo, si potrebbe formare condensa al suo interno, causando possibili malfunzionamenti. Se ciò si dovesse verificare, si prega di attendere almeno un'ora prima dell'uso in modo da permettergli di raggiungere la temperatura ambiente gradualmente.