Once the player has been switched on and the protective cover opened, the LCD screen will display a welcome message. This alone consumes significant power. If you are running on batteries and not planning on playing a disc immediately, it is recommended that you do not open the cover in order to save power.
If you plan to suspend use of the player for a significant period of time, it is recommended that the power cord (or batteries) be removed to pre- vent unnecessary power drain.
5 Player Controls (6)
A note regarding the automatic power saving function
Once the player has been stopped for over ap- proximately five minutes, the system will enter “standby” mode and is prepared to respond im- mediately to a power up. In standby mode, power consumption is reduced to a minimum level to save power, the front LCD status window will read “oFF”. The player could be turned back on by pressing the POWER button on the remote control or by switching the ON/OFF button on the left side of the player to the ON position.
In the case battery pack is used for operating the player and the standby mode is activated for 10 seconds, the system will then totally shut down the power consumption, the front LCD sta- tus window will now blank and the battery power is preserved.
DVD1500 | 31 |
