Adjustment in YPbPr mode
To enter into YPbPr mode
Repeatedly press 
button on the remote control or SOURCE button on the set's panel until the screen display YPbPr, which indicates that the set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and make sure there is signal input.
Adjusting picture
In YPbPr mode when there is correct input signal, press MENU button and
PICTURE SETTING menu appears. Use CH5/6to select item and
VOL+/- to adjust.
Item | VOL- | VOL+ |
Brightness | darker | lighter |
Contrast | weaker | stronger |
Saturation | paler | deeper |
Sharpness | softer | sharper |
PICTURE SETTING
Brightness | 25 |
Contrast | 25 |
Saturation | 25 |
Sharpness | 25 |
Color Temp | 9300K |
<LEFT> or <RIGHT> key to change
Adjusting Color temperature
You can select different Color temperature to obtain correct white. Press MENU button, use CH5/6 to select Color Temp item, press the VOL+/- to select between
PICTURE SETTING
Brightness | 25 |
Contrast | 25 |
Saturation | 25 |
Sharpness | 25 |
Color Temp | 9300K |
<LEFT> or <RIGHT> key to change
Adjusting horizontal / vertical position
Press MENU button twice and the PICTURE POSITION menu appears. Use CH5/6to select item and VOL+/- to adjust.
When nonstandard signal input to the set and the picture may not be in the screen center. Now you can adjust its horizontal and vertical position to display correctly.
PICTURE POSITION
Horizontal | 25 |
Vertical | 25 |
<LEFT> or <RIGHT> key to change
*To exit the menu, press ENTER button.
32
