Setting Sound
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the VOL + or VOL- to increase or decrease the volume.
Using the Mute
At any time, you can temporarily cut off the sound using the MUTE button. Press the MUTE button again to restore.
Customizing the sound
1 | Press MENU to display the main menu. |
2 | Press 3or4to display AUDIO menu page, press 6to enter. |
3 | Within the menu, use 5or6 to select item, use3or4 to |
| adjust. |
4 | Press EXIT button to return to TV viewing. |
| AUDIO |
Headphone volume | 015 |
Treble | 050 |
Bass | 050 |
Balance | 050 |
Focus window out | Speaker |
AVC | ON |
Option | Function | Choice/Remarks | |
|
|
| |
Headphone | Adjusts headphone volume. | 4: stronger | |
volume | 3: weaker | ||
| |||
Treble | Adjusts Treble (high sounds). | 4: stronger | |
3: weaker | |||
|
| ||
Bass | Adjusts Bass (low sounds) | 4: stronger | |
3: weaker | |||
|
| ||
Balance | Adjusts volume balance (left and right volumes). | 4:Higher volume from right speaker. | |
3:Higher volume from left speaker. | |||
|
|
| |
| =In twin window mode(PIP or PBP), if “speaker” is |
| |
| selected, then the focus window* sound is output from |
| |
| speakers while the other window sound is output from |
| |
Focus window | headphone. (Default setting) |
| |
=If “Headphone” is selected, then the focus window | Speaker/Headphone/Both | ||
out | sound is output from headphone while the other | ||
| |||
(PIP or PBP mode only) | window sound is output from speakers. |
| |
| =If “Both” is selected, then both speakers and |
| |
| headphone output focus window sound(as for the |
| |
| other window, this menu item will be set to “None” |
| |
| automatically). |
| |
| Each broadcasting station has its own signal conditions, |
| |
AVC | which can make it necessary to adjust the volume every |
| |
time the channel is changed. Turning "AVC" On lets | ON/OFF | ||
(auto volume | you automatically adjust the volume of the desired | ||
control) | channel by lowering the sound output when the |
| |
modulation singal is high or by raising the sound output |
| ||
|
| ||
| when the modulation signal is low. |
| |
|
|
|
Notes:
The menu items may be different when the unit works in different mode.
Focus Window Out menu item is available only in twin window mode (PIP or PBP) and either window’s program is not in Rating Blocked. If “Both” is selected and later on if either window’s program comes into Rating Blocked, the sound may be mute. To cancel, please exit the Rating Blocked state for the program and then set this menu item to other proper choice.
Normally the main picture is default focus window. You may select sub picture as focus window by pressing OK button and a green border will appear on it.
25
