Audiovox XMCK10AP manual FM ON or OFF Feature, FM OFF Screen, FM Frequency Screen

Models: XMCK10AP

1 42
Download 42 pages 45.92 Kb
Page 14
Image 14
FM Frequency

FM Frequency

The following Frequency Setting adjustments are possible:

NOTE:The Xpress XM7 unit has an internal wireless FM trans- mitter, which allows you to play the audio through any standard FM receiver, eliminating the need for hardwire connections. In certain urban areas of the country where strong FM stations may overpower the Xpress XM7 unit FM transmitted signal, an FM direct adapter may be needed to achieve a clean audio signal (Part Number XMFM-1)

FM ON or OFF Feature

This feature allows the user to turn the FM Transmitter ON or OFF. It is recommended that you turn the FM Transmitter OFF if you are using the low level audio outputs in your particular application (optional cable needed SAT-RCA) (see Figure 7). Upon entering the “FM Frequency” mode the FM transmitter will be OFF by default. To turn the FM Transmitter ON, turn the Rotary/Select knob CW/CCW or use the UP and DOWN buttons on the Remote Control to the highlight the desired frequency (88.1, 88.3, 88.5,.......107.9).

Figure 7. FM OFF Screen

The selected frequency must be an unused frequency or a frequency used by a low powered FM station in your area. If not, the strong signal from the FM station may overpower the Xpress XM7 unit FM transmitted signal which may result in interference.

With the FM Frequency highlighted, press the Rotary/Select Knob or the (XM) Select button on the remote control to confirm the selection (see Figure 8).

Figure 8. FM Frequency Screen

-14-

Page 14
Image 14
Audiovox XMCK10AP manual FM ON or OFF Feature, FM OFF Screen, FM Frequency Screen