20 Operating Your Appliance
© Travis Industries 100-01190_000 4070326
Opening the Doors
Typically the doors are only opened to start the fire. Use the Loading Lid to re-load the stove.
Swing the
doors open.
WARNING: Do not swing the doors past 90°. This may cause
the doors to strike the body of the stove and cause damage.
NOTE: When closing the doors, close the left door first. Then
shut the right door and tighten the latch.
A door latch tool is included for
operation when the door latch is
hot. Hang the tool on the air
control when not in use.
Open the bypass first (this prevents
smoke from entering the room).
Open the latch
The door becomes hot during use. Use a glove to open the door if the handle is hot.
To prevent smoke from entering the room, open the bypass before opening the door (see following page
for directions). You can also open the door a small amount and let air enter the firebox.