Avalon Stoves Stove manual Adjusting the Door Hinge and Latch, Latch Adjustment

Maintenance3 7

Yearly Maintenance (or every ton) - continued

Adjusting the Door Hinge and Latch

•The door hinge and door latches may be adjusted to pull the door closer to the body. The illustration below details how to adjust these components. NOTE: Make sure to read the section "Door Alignment" on the previous page before adjusting the door.

Open the hopper lid and remove the two screws holding the side doors in place.

Latch Adjustment

Loosen the lock nut and twist the pawl (clockwise to tighten, counter-clockwise to loosen). Tighten the lock nut to secure in place.

Door Hinge Bracket

Hinge Adjustment

(1) With the door closed, loosen the two bolts going through the door hinge bracket.

(2)Loosen the four nuts used to move the hinge adjusting plate.

Tighten or loosen these nuts to adjust the door hinge bracket. Adjust the upper and lower nuts equally to insure the door remains level. Tighten the four nuts.

Bracket (attached to side of

heater)

Door

Pawl

Lock Nut

Dimple (used to monitor hinge bracket position)

Door

Hinge Adjusting Plate

(3) Tighten the two bolts loosened in

© Travis Industries 4080725 100 - 0115 4