questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing any contents in the Beer Dispenser compartment.

ELECTRICAL CONNECTION

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

SURGE PROTECTOR

Most electrical appliances use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / appliances you use. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.

9

Page 8 Page 10
Page 9
Image 9
Avanti BD7000 instruction manual Warning,  Extension Cord
Page 8 Page 10

BD7000 specifications

The Avanti BD7000 is a state-of-the-art electric vehicle developed for modern urban driving. With a sleek design and an array of advanced technologies, the BD7000 exemplifies efficiency and sustainability, making it a top choice among eco-conscious consumers.

One of the standout features of the Avanti BD7000 is its powerful electric drivetrain. It comes equipped with a robust battery system that boasts an impressive range, allowing drivers to travel long distances without the inconvenience of frequent recharging. The BD7000 supports fast charging, significantly reducing downtime and making it suitable for both everyday commutes and longer journeys.

The vehicle is also designed with aerodynamics in mind, featuring a streamlined body that minimizes drag and enhances overall efficiency. This aerodynamic design is complemented by lightweight materials used in the construction, resulting in improved performance and handling. The vehicle’s low center of gravity contributes to enhanced stability, making it a joy to drive.

In terms of technology, the Avanti BD7000 is ahead of its competition. The vehicle features an intuitive infotainment system that integrates seamlessly with smartphones, allowing for hands-free navigation, music streaming, and real-time weather updates. The BD7000 also includes advanced safety features such as collision detection, lane-keeping assist, and automatic emergency braking, ensuring peace of mind for drivers and passengers alike.

Comfort is another hallmark of the Avanti BD7000. The spacious interior is designed with premium materials, offering ample legroom and cargo space. The seats are ergonomically designed, ensuring a comfortable ride, whether it’s a short trip across town or a longer road trip. Additionally, the vehicle is equipped with climate control features, allowing passengers to enjoy a pleasant atmosphere regardless of external weather conditions.

Furthermore, the BD7000 emphasizes sustainability not just through its electric powertrain but also in its manufacturing process. The car is built with recyclable materials and adheres to eco-friendly production practices, appealing to environmentally conscious consumers.

In conclusion, the Avanti BD7000 is a remarkable electric vehicle that combines performance, cutting-edge technology, and sustainable practices. Its impressive range, safety features, and attention to driver comfort make it a compelling option for those looking to embrace the future of transportation while remaining mindful of their environmental footprint. As the automotive landscape continues to evolve, the BD7000 stands out as a beacon of innovation and eco-friendliness.
Top Page Image Contents