Avaya 3500YL, 2600, 5400ZL manual Configure Lab-A ProCurve 3500yl-24G-PWR Switch

9.Set priority for telephony ports.

•Set the port QoS priority of the Avaya Modular Messaging Message Storage Server to 6.

•Set the port QoS priority of the Avaya Modular Messaging Messaging Application Server to 6.

•Set the port QoS priority of the Avaya SIP Enablement Services to 6

•Set the port QoS priority of Avaya Communication Manager to 6

ProCurve Switch 5406zl# configure

ProCurve Switch 5406zl(config)# interface a4

ProCurve Switch 5406zl(eth-A4)# qos priority 6

ProCurve Switch 5406zl(eth-A4)# exit

ProCurve Switch 5406zl# configure

ProCurve Switch 5406zl(config)# interface a5

ProCurve Switch 5406zl(eth-A5)# qos priority 6

ProCurve Switch 5406zl(eth-A5)# exit

ProCurve Switch 5406zl# configure

ProCurve Switch 5406zl(config)# interface a10

ProCurve Switch 5406zl(eth-A10)# qos priority 6

ProCurve Switch 5406zl(eth-A10)# exit

ProCurve Switch 5406zl# configure

ProCurve Switch 5406zl(config)# interface a21

ProCurve Switch 5406zl(eth-A21)# qos priority 6

ProCurve Switch 5406zl(eth-A21)# exit

10. Save the running configuration to the startup configuration.

ProCurve Switch 5406zl# configure

ProCurve Switch 5406zl(config)# write memory

6. Configure Lab-A ProCurve 3500yl-24G-PWR Switch

This section addresses configuring the ProCurve 3500yl-24G-PWR Switch. The ProCurve 3500yl-24G-PWR Switch is used as the Lab-A Layer 2/ Layer 3 router, enforces QoS policies, and supports link aggregation, OSPF and spanning tree.

To configure the ProCurve 3500yl-24G-PWR Switch, connect a PC or laptop to the serial port of the ProCurve 3500yl-24G-PWR Switch. Run a terminal emulation program with the following configuration:

ƒBits per second: 9600

ƒData bits: 8

ƒParity: None

ƒStop bits: 1

ƒFlow Control: None

TMA; Reviewed:	Solution & Interoperability Test Lab Application Notes	11 of 21
SPOC 7/21/2008	©2008 Avaya Inc. All Rights Reserved.	ProCurve-ACM