4.Create and configure the data VLAN that will run between the control room and the closets.

Assign a VLAN ID for the data VLAN.

Assign a name for the data VLAN.

Assign ports to the data VLAN.

ProCurve Switch 2626-PWR# configure

ProCurve Switch 2626-PWR(config)# vlan 30

ProCurve Switch 2626-PWR (vlan-30)# vlan 30 name Datavlan1

ProCurve Switch 2626-PWR (vlan-30)# tagged 1-2

ProCurve Switch 2626-PWR (vlan-30)# exit

5. Save the running configuration to the startup configuration.

ProCurve Switch 2626-PWR# configure

ProCurve Switch 2626-PWR(config)# write memory

8. Configure Closet-B ProCurve 2610-24-PWR Switch

This section addresses configuring the ProCurve 2610-24-PWR Switch. The ProCurve 2610-24- PWR Switch is used as an edge switch to supply PoE power, support VLANs, link aggregation and to enforce QoS policies.

To configure the ProCurve 2610-24-PWR Switch, connect a PC or laptop to the serial port of the ProCurve 2610-24-PWR Switch. Run a terminal emulation program with the following configuration:

ƒBits per second: 9600

ƒData bits: 8

ƒParity: None

ƒStop bits: 1

ƒFlow Control: None

1.Log into the ProCurve 2610-24-PWR Switch using the appropriate Login ID and Password.

Login:

Password:

ProCurve Switch 2610-24-PWR#

TMA; Reviewed:

Solution & Interoperability Test Lab Application Notes

16 of 21

SPOC 7/21/2008

©2008 Avaya Inc. All Rights Reserved.

ProCurve-ACM

Page 16
Image 16
Avaya 5400ZL, 2600, 3500YL manual Configure Closet-B ProCurve 2610-24-PWR Switch