5.Create and configure the telephony VLAN where all of the Avaya telephony equipment will run.
•Assign a VLAN ID for the telephony VLAN.
•Assign a name for the telephony VLAN.
•Assign an IP address for the telephony VLAN.
•Assign ports to the telephony VLAN.
•Assign a QoS priority to the telephony VLAN.
•Note: The commands identified with an “*” below are required when connecting an Avaya G700 Media Gateway to a ProCurve 5406zl Switch with J8177C Transceiver. Auto negotiation for the associated port must be set to
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# vlan 10
ProCurve Switch 5406zl
ProCurve Switch 5406zl
ProCurve Switch 5406zl
ProCurve Switch 5406zl
ProCurve Switch 5406zl
*ProCurve Switch 5406zl# configure
*ProCurve Switch 5406zl(config)# interface a21
*ProCurve Switch
6.Create and configure the voice VLAN that will run between the control room and closets.
•Assign a VLAN ID for the voice VLAN.
•Assign a name for the voice VLAN.
•Assign voice option.
•Assign an IP address for the voice VLAN.
•Set an IP helper address for DHCP.
•Assign ports to the voice VLAN.
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# vlan 33
ProCurve Switch 5406zl
ProCurve Switch 5406zl
ProCurve Switch 5406zl
ProCurve Switch 5406zl
ProCurve Switch 5406zl
ProCurve Switch 5406zl
TMA; Reviewed: | Solution & Interoperability Test Lab Application Notes | 9 of 21 |
SPOC 7/21/2008 | ©2008 Avaya Inc. All Rights Reserved. |