IP406 Office Platform IP406 Office - Front View - Page 19
IP406 Office - Front View Expansion Ports 1
Green Status LEDs
Cascade Switch for Port
8
ISDN Port s 1
Green Status LEDs
WAN Por
t
Green Status LED
LAN Ports 1-8
Port
8
(Cascade Port
)
Unit Statu
s
Red = Alive but not init iated
Green = Running OK
Y
ellow LED
LAN Collision
Green LED
Solid Green LED - LAN OK
Flashing Green - LAN OK and active
Y
ellow LED
On - 100Mbps operation
0ff - 10Mbps operation
Port connections
• LAN Ports
The eight auto-negotiating 10/100 BaseT LAN hub ports are used for PC and server connectivity.
They can also be used to connect to the optional IP400 WAN3 Expansion Module (see page 30)
and IP telephones.
LAN ports allow information relating to incoming and outgoing telephone calls to be forwarded to
PC based applications. They also provide access to the router functionality/configuration of the
IP406 Office platform for both data and Voice over IP (VoIP) calls. (Where IP telephony is
required, the hub must be connected to a suitable switch, i.e. an Avaya Cajun P130.) This eight
port auto-negotiating 10/100 BaseT LAN hub supports a single MAC address only (printed on the
base of the module).
Where more than eight LAN connections are required, the eighth LAN port can be used for
cascading to other hubs. The Cascade pushbutton to the right of this port is used to set the
mode. When the Cascade switch is in the out position the port can be connected to another hub
without the need for a crossover cable, i.e. the port is an MDI type port. When the Cascade
switch is in the in position the port can be connected directly to a PC.
Cables
IP406 Office PRI 30 E1 & PRI 24 T1 are supplied with one red ISDN cable. IP406 Office Analog 4 is
supplied with four red ISDN cables. IP406 Office BRI 16 is supplied with eight red ISDN cables. For
Port Pinouts and Cables, refer to pages 51 and 55 respectively.
IP Office Installation Manual IP406 Office Platform - Page 19
40DHB0002USCL – Issue 7 (09/25/2002) IP406 Office - Front View