Safety and Homologation Statements Regulatory Instructions for Use - Page 9
IP Office Operation in EU
1. 999 and 112 calls must not be barred. Doing so will invalidate the approval.
2. All connections at the MDF shall be identifiable by suitable labeling.
3. The CE mark displayed on IP Office equipment indicates the systems compliance with the EMC,
LVD, and R&TTE Directives and common technical regulations for Primary Rate and Basic Rate
ISDN.
4. All ports for the connection of other non-telecommunications apparatus have a Safety Extra Low
Voltage (SELV) safety status.
IP Office Operation in New Zealand
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it imply that any product is
compatible with all of Telecom's network services.
IP Office Operation in USA

FCC Notification

This equipment is registered with the ACTA (Administrative Council for Terminal Attachments) in
accordance with FCC Part 68 of its rules. In compliance with those rules, you are advised of the
following:
• Means of Connection. Connection of this equipment to the telephone network shall be through a
standard network interface jack. Connection to 1.544-MBps digital facilities must be through a
USOC RJ48C. Connection to the Analog Trunk facilities must be through a USOC RJ45S.
• Notification to the Telephone Companies. Before connecting this equipment, you or your
equipment supplier must notify your local telephone company’s business office of the telephone
number or numbers you will be using with this equipment.
• The facility interface codes (FIC) for 1.544-MBps digital connection (i.e. IP400 Office PRI-T1)
are 04DU9.BN, 04DU9.DN, 04DU9.IKN, 04DU9.ISN.
• The facility interface code (FIC) for analog trunk connection (i.e IP400 Office Quad Analog
Trunk-LS) are OL13A, OL13B, OL13C, 02AC2, 02LA2, 02LB2, 02LC2, 02LR2, 02LS2.
• The facility interface code (FIC) for analog trunk connection (i.e. IP400 Office ATM16-LS/GS)
are OL13A, OL13B, OL13C, 02AC2, 02GS2, 02LA2, 02LB2, 02LC2, 02LR2, 02LF2.
• The Service Order Code (SOC) for 1.544-MBps digital connection (i.e. IP400 Office PRI-T1) is
6.0Y
• The Service Order Code (SOC) for analog trunk connection (i.e. IP400 Office Quad Analog
Trunk-LS) is 9.0Y
• Disconnection. You must also notify your local telephone company if and when this equipment is
permanently disconnected from the line or lines.
• Hearing Aid Compatibility. The custom telephone sets for this system are compatible with
inductively coupled hearing aids as prescribed by the FCC.
Ringer Equivalence Number (REN). The REN is used to determine the number of devices that may
be connected to the telephone line. Excessive RENs on the line may result in the devices not ringing
in response to an incoming call. In most, but not all, areas, the sum of the RENs should not exceed
five. To be certain of the number of devices that may be connected to the line, as determined by the
total RENs, contact the local telephone company to determine the maximum REN for the calling
area.
IP Office Installation Manual Safety and Homologation Statements - Page 9
40DHB0002USCL – Issue 7 (09/25/2002) Regulatory Instructions for Use