Avaya 518-456-161 - page 48

PARTNER® Advanced Communications System

40

PARTNER® ACS 1600 DSL Module Planning Checklist

Required Information Notes Sample values Enter values for current installation

Static Binding IP

address3Links a host to an address using MAC number. 192.168.32.33

00:c0:d5:d4:da:2c See worksheet (if necessary)

NAT3Allows multiple LAN hosts to access the Internet behind

one public IP address. E (to enable); D (to

disable)

7. Packet filtering needs

Actions to be permitted

or denied3Enter rules via the IP Filtering Configuration menu. Permit HTTP, Deny PING See worksheet (if necessary)

IP-based servers

supported by customer3Obtain IP addresses for all servers that require external

access. Email 198.168.34.53

Web 198.168.121.13

8. Routing requirements

Activate RIP3Optional; Only for more complex networks. Version 1 Broadcast;

Version 2 Broadcast;

Version 2 Multicast

Static routing table

entries3Only used if other routers exist on the network. See worksheet (if necessary)

9. Bridging settings Bridging is a rare configuration that allows the 1600 DSL to support older, in-place LAN protocols, such as AppleTalk. Bridging

directs information by hardware MAC address rather than IP address.

Bridge Aging

Timer3

Spanning Tree:

Enabled3

Spanning Tree: Port

Priority3

Spanning Tree: Hello

Time3

1. Obtained from SDSL provider

2. Obtained from ISP

3. Obtained from customer/LAN VAR

Contents

Main Page Page Page Internet Security-Related Issues General Information Page Table of Contents Page Form ACustomer Information Form A: Instructions for Customer Information Service Verification 3 Form BSystem Configuration: Lines Form BSystem Configuration: Lines Form B: Instructions for System Configuration: Lines Page 6 Form CExtension Settings Form CExtension Settings Note: See Form C1 to enter character codes for Ext. Display. 7 Form CExtension Settings (Continued) Form CExtension Settings (Continued) 0 8 Form C1Extension Settings Worksheet Form C1Extension Settings Worksheet May be used if Ext. Display is checked on Form C. 9 Form C1Extension Settings Worksheet (Continued) Form C1Extension Settings Worksheet (Continued) 0 Form C: Instructions for Extensions Settings Page Form CExtension Settings: Feature Descriptions Feature Descriptions 13 # FEATURE DESCRIPTION 14 # FEATURE DESCRIPTION Page Page Form DAuxiliary Equipment Form D: Instructions for Auxiliary Equipment Form ESystem Configuration: Default Settings Form E: Instructions for System Configuration: Default Settings Forms F1-F5: System Configuration: Lists 22 Form F1System Speed Dial Form F1System Speed Dial Optional for PARTNER Advanced Communications System. For additional instructions, see next pa ge. Form F1: System Speed Dial Supplemental Instructions General Guidelines Name/Company * Column (Marked System Speed Dial Numbers) Page 25 Form F2aDisallowed Lists Form F2aDisallowed Lists Disallowed Phone Number Lists (#404) 26 Form F2bAllowed Lists Form F2bAllowed Lists Allowed Phone Number Lists (#407) Form F2a & F2b: Instructions for Creating Disallowed and Allowed Lists 0 Disallowed Phone Number Lists (#404) Allowed Phone Number Lists (#407) Form F3Hunt Groups Form F3: Instructions for Identifying Hunt Group Assignments Hunt Group Extensions 16 (#505) VMS Only (Hunt Group 7) Fax Only (Hunt Group 8) 30 Form F4Forced Account Code Forced Account Code List (#409) Form F4: Instructions for Forced Account Codes Forced Account Code List (#409) 32 Form F5Customized Extensions/Pool Access Restrictions Form F5Customized Extensions/Pool Access Restrictions 33 Form F5Customized Extensions/Pool Access Restrictions (Continued) Form F5Customized Extensions/Pool Access Restrictions (Continued) 0 Form F5: Instructions for Pool Access Restrictions Pool Access Restriction (#315) Outgoing Call Restriction (#401) PART NER ACS 1600 DSL Module Planning Checklist 0 Page Page Page Page Page Page Page PART NER ACS T1 Module Planning Forms 0 Form G1T1 Module Parameters Form G1: Instructions for T1 Module Parameters 46 Form G2T1 Module Line Settings Form G2T1 Module Line Settings Note: This form displays the default line setting for each T1 line. Form G2: Instructions for T1 Module Line Settings Form G3Direct Inward Dialing (DID) Form G3: Instructions for Direct Inward Dialing (DID) 50 Form G4Direct Inward Dialing (DID) Mapping Table Form G4Direct Inward Dialing (DID) Mapping Table DID Mapping Table Form G4: Instructions for Direct Inward Dialing (DID) Mapping Table Appendix A: Security Notification and Checklist I. Introduction II. Roles and Responsibilities Page PARTN ER ACS 1600 DSL Module Security Checklist 0