Page 44 - Function Key Features Function Keys
Page 44 - Function Keys IP Office (R3.0) 5620SW + EU24 User’s Guide
Function Key Features 40DHB0002USEP – Issue 1 (13th January 2005)
HGOS+ - Set Hunt Group Out of Service Put a specific hunt group out of service mode.
This function requires the hunt group number to be entered when programmed. The
hunt group number is then shown next to HGOS+. This function cannot be
programmed through the phone by the user.
Pressing HGOS+ puts the hunt group out of service. Group calls then go to its out
of service fallback group if set or, if not answered, to voicemail.
[User | Digital Telephony | Advanced | Set | Set Hunt Group Out Service]
Returns a hunt group that has been manually put into out of service back to normal
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 43.
This function requires that the hunt group number is entered when programmed. This
function cannot be programmed through the phone by the user.
The hunt group number is shown next HGOS-. Pressing HGOS- puts the group
back into normal service if in night service.
[User | Digital Telephony | Advanced | Call | Clear Hunt Group Out Of Service]
Place the current call on hold at the central office. This function is not supported in the
USA.
If no exchange slot number is specified when the function is programmed, central office
slot 0 is used.
Pressing Hold is only supported if the central office provides a Q.931 hold facility. It
is not the same as local hold provided by the IP Office.
[User | Digital Telephony | Advanced | Hold | Hold Call]
See also:
• Rtriv - Retrieve Call on page 52.
Place the current call on hold and connects any call waiting. This function is not
supported in the USA.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing HoldCW places the current call on hold and connects any call waiting
without any ringing.
[User | Digital Telephony | Advanced | Hold | Hold CW]