Page 52 - Function Key Features Function Keys
Page 52 - Function Keys IP Office (R3.0) 5620SW + EU24 User’s Guide
Function Key Features 40DHB0002USEP – Issue 1 (13th January 2005)
Resum - Resume Call
Resume a call previously suspended into a specified ISDN exchange slot. This function
is not supported in the USA.
This function requires the exchange slot number to be specified when programmed.
The slot number is then shown next to Resum. This function cannot be
programmed through the phone by the user.
Pressing Resum resumes any call previous suspended into the specified exchange
slot. Suspended calls can be resumed by any extension.
[User | Digital Telephony | Advanced | Call | Resume Call]
See also:
• SusCW - Suspend CW on page 53.
• Suspe - Suspend Call on page 54.
Rtriv - Retrieve Call
Retrieve a call previously held into a specified ISDN central office slot and is only
supported if the central office provides a Q.931 hold facility. This function is not
supported in the USA.
This function requires the central office slot number to be specified when programmed.
The slot number is then shown next to Rtriv. This function cannot be programmed
through the phone by the user.
Pressing Rtriv retrieves any call previous held into the specified central office slot.
Held calls can only be retrieved by the extension that put the call on central office hold.
[User | Digital Telephony | Advanced | Call | Retrieve Call]
See also:
• Hold - Hold Call on page 44.
Ride - Ride Call
Unpark a parked call from a specified system park slot.
This function requires the park slot number to be specified when programmed. The slot
number is then shown next to Ride. This function cannot be programmed through
the phone by the user.
Pressing Ride unparks any call previously parked into the specified system park
slot by the same or another extension.
[User | Digital Telephony | Advanced | Call | Ride Call]
See also:
• CPark - Call Park (!) on page 34
• Park - Park (#) on page 47.
• Park - Call Park to Other Extension (!) on page 48.
RngOf - Ringer Off (!)
Switches the phones audible ringer on/off.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an Admin key.
The programmed RngOf key toggles the phones call ringer on/off. When off,
RngOf is shown with a symbol.
[User | Digital Telephony | Emulation | Ringer Off]
See also:
• CWOn - Call Waiting On on page 35
• HfAns - Internal Auto-Answer (!) on page 42.